新闻资讯
行业新闻
- 冷热通道具备哪些特点？
- 本站编辑:杭州建奥电器有限公司发布日期：2018-07-23 00:00 浏览次数：
冷热通道的特点：
Characteristics of cold and hot passages:
1、模块化
1, modularization
冷通道封闭采用为模块化设计，冷通道两侧相对应的两台机柜为一个模块；每个模块均能独立安装与拆卸，方便用户增加、减少或者移动通道内部分机柜。
The cold channel closure is designed as a modular design, and the two cabinets on both sides of the cold channel are a module. Each module can be installed and disassembled independently to facilitate the user to increase, reduce or move some of the cabinet in the channel.
2、安全性
2. Safety
每个顶板均可实现与消防联动。当机房内火灾信号确认后，顶板自行打开，消防灭火气体可以进入通道灭火。
Each roof can be linked with fire protection. When the fire signal is confirmed in the engine room, the roof is opened by itself, and the fire extinguishing gas can enter the passage to extinguish the fire.
3、便捷性
3. Convenience
无门槛设计，方便小推车等运输工具无阻碍进出。
There is no threshold design to facilitate the transportation of vehicles such as trolley.
4、美观性
4, beauty
通道封闭窗口材料为透明玻璃，外观为与机柜同材质的冷轧钢板，机械强度高，通透性好，整体美观，与机柜风格一致，和机房环境比较协调。
The closed window material is transparent glass, the appearance is the cold rolled steel plate with the same material as the cabinet. It has high mechanical strength, good permeability, the whole beauty, and the style of the cabinet, and the environment of the machine room is more coordinated.
5、按需定制化
5. On demand customization
根据现场机柜高度和机房顶部空间高度，可灵活调整封闭方案。顶板全翻转/半翻转方案。
The sealing scheme can be flexibly adjusted according to the height of the cabinet and the height of the top space of the machine room. Top plate full flip / half flip scheme.
根据现场封闭通道外走道宽度，封闭通道可选择推拉开门方式或左右平移开门方式，灵活调整封闭方案。
According to the width of the walkway outside the closed channel, the closed channel can choose the push pull door mode or the left and right translation door opening mode to flexibly adjust the closure scheme.
6、安装可靠性
6. Installation reliability
通道封闭各部件均安装固定在机柜承重框架上；
All parts of the passageway seal are installed on the load-bearing frame of the cabinet.
固定点主要分布在机柜承重框架的顶面、正面、侧面；
The fixed points are mainly distributed on the top, front and side of the load-bearing frame of the cabinet.
安装简单，整体协调美观，不会破坏机房现有装修，安装现场不用动火烧焊
The installation is simple and the overall coordination is beautiful. It will not damage the existing decoration of the engine room.
Characteristics of cold and hot passages:
1, modularization
冷通道封闭采用为模块化设计，冷通道两侧相对应的两台机柜为一个模块；每个模块均能独立安装与拆卸，方便用户增加、减少或者移动通道内部分机柜。
The cold channel closure is designed as a modular design, and the two cabinets on both sides of the cold channel are a module. Each module can be installed and disassembled independently to facilitate the user to increase, reduce or move some of the cabinet in the channel.
2、安全性
2. Safety
每个顶板均可实现与消防联动。当机房内火灾信号确认后，顶板自行打开，消防灭火气体可以进入通道灭火。
Each roof can be linked with fire protection. When the fire signal is confirmed in the engine room, the roof is opened by itself, and the fire extinguishing gas can enter the passage to extinguish the fire.
3、便捷性
3. Convenience
无门槛设计，方便小推车等运输工具无阻碍进出。
There is no threshold design to facilitate the transportation of vehicles such as trolley.
4、美观性
4, beauty
通道封闭窗口材料为透明玻璃，外观为与机柜同材质的冷轧钢板，机械强度高，通透性好，整体美观，与机柜风格一致，和机房环境比较协调。
The closed window material is transparent glass, the appearance is the cold rolled steel plate with the same material as the cabinet. It has high mechanical strength, good permeability, the whole beauty, and the style of the cabinet, and the environment of the machine room is more coordinated.
5、按需定制化
5. On demand customization
根据现场机柜高度和机房顶部空间高度，可灵活调整封闭方案。顶板全翻转/半翻转方案。
The sealing scheme can be flexibly adjusted according to the height of the cabinet and the height of the top space of the machine room. Top plate full flip / half flip scheme.
根据现场封闭通道外走道宽度，封闭通道可选择推拉开门方式或左右平移开门方式，灵活调整封闭方案。
According to the width of the walkway outside the closed channel, the closed channel can choose the push pull door mode or the left and right translation door opening mode to flexibly adjust the closure scheme.
6、安装可靠性
6. Installation reliability
通道封闭各部件均安装固定在机柜承重框架上；
All parts of the passageway seal are installed on the load-bearing frame of the cabinet.
固定点主要分布在机柜承重框架的顶面、正面、侧面；
The fixed points are mainly distributed on the top, front and side of the load-bearing frame of the cabinet.
安装简单，整体协调美观，不会破坏机房现有装修，安装现场不用动火烧焊
The installation is simple and the overall coordination is beautiful. It will not damage the existing decoration of the engine room.
